TOP TEN ALARM SDN. BHD. -- PRODUCT -- AUTO GATE

PRODUCT > AUTO GATE > Sliding GATE Gearmotor

vigitronx sa1 / sd1

Configuration	Single phase induction motor couple with worm gear speed reducer with manual override release clutch controlled by electronic circuitry.
Driving Output	Rack and pinion gear. module 4.
Power Supply	AC 240V 50Hz / 24V DC
Current	5A Max
Motor R. P. M.	AC 1400 / 4200 DC
Duty	50 cycle / hour
Capacity	1200kg. max.
Velocity	10m/min. and 15.5m/min.
Working Temperature	-20C + 80C
Lubrication	Grease type (non oil bath).
Safety Device	Electronic clutch for anti-crushing.

vigitronx sd2

Driving Method	Rack and Pinion of module 4.
Operating Voltage	DC 18V for normal speed.
	DC 12V for ending speed.
Motor Output	30W
Motor Amp.	3.5
Motor Rotation Speed	1800r.p.m at 12V
Normal Speed	25cm/sec linear
Ending Speed	12cm/sec linear
Back-up Battery	12 volt. 7AH Rechargeable
Safety Clutch	Electric current sensing using Hi-Amp Auto-Reverse.
Electric Controller	Microprocessor based.
Safety Barrier	Infrared beam sensor (optional).
Temperature	0 to 80C
Gear Box	Oil bath worm type reducer.
Manual Operation	Special released key for power failure.
Max. Weight of Gate	ONE tone with force adjustable.
Max. Length of Gate	11 meters with 45sec. cut-off time.

telcoma ace 400/800

Irreversible electromechanical gear motor for sliding gates. Electromechanical gear motor for sliding gates up to 800Kg. Complete with the safety devices such as encoder, limit switch and built-in control panel, the ACE series represent the future in the automation field.

telcoma evo 600/800/1200

Irreversible electromechanical gear motor for sliding gates. Fitted up with control panel and magnetic encoder, EVO gear motor's series respects the EC safety requirements. The EVO gear motor's series offers a complete versatility, being adjustable in height and depth. Included control panel with cover protection.

telcoma SM2000

Gear motor for industrial sliding gates. SM 2000 is an oil bath gear motor for automation of large-dimension sliding gates up to 2000Kg. The top quality design of individual components (tested separately) make the SM 2000 a gear motor with totally guaranteed safety and reliability.

achilles

Model	Achilles -1500 230V	Achilles-1500 380V	Achilles-2500 230V	Achilles-2500 380V	Achilles-5000 230Vac	Achilles-5000 400Vac
Power supply	230V~ / 50Hz	380V~ / 50Hz	230V~ / 50Hz	380V~ / 50Hz	230V~ / 50Hz	400V~ / 50Hz
Max Input current (A)	4	1.7	5.5	2.2	6.4	3.75
Motor power supply	230V~	380V~trifase	230V~	380V~trifase	230V~	400V~trifase
Motor power (W)	3 / 4 hp	3 / 4 hp	1 hp	1 hp	2 hp	2 hp
Capacitor	16μF	-	20μF	-	20μF	-
Rpm	1350	1400	1350	1400	1400	1400
Reduction ratio	1 / 38	1 / 38	1 / 38	1 / 38	1 / 30	1 / 30
Minimum speed at full load	9.8m /min	9.8m /min	9.8m /min	9.8m /min	11m /min	11m /min
Working temperature (°C )	-20 <> +70	-20 <> +70	-20 <> +70	-20 <> +70	-20 <> +60	-20 <> +60
Work cycle (%)	intensivo / intensive	intensivo / intensive	intensivo / intensive	intensivo / intensive	50	50
lP protection level	43	43	43	43	44	44
Thrust force	(max. 1000N)	(max. 1000N)	(max. 1600N)	(max. 1600N)	(max.3200N)	(max. 3200N)
Gate max. load	1500 kg	1500 kg	2500 kg	2500 kg	5000 kg	5000 kg
Weight (kg)	18	18	18	18	59	59

G-force sl1000

Operating Voltage	:	AC 220-240V 50Hz	Safety Cut-Off/Auto Reverse	:	Electronic Load Surge Detector
Output Power	:	600W	IR Safety Beam	:	Optional
Motor Rotation Speed	:	1400RPM	Safety Limit Timer	:	Yes
Max. Weight of Gate	:	1,000kg	Automatic Lighting	:	Yes
Linear Speed	:	10m/min	Lubrication	:	Oil Bath Gear Motor
Transmission Type	:	Gear Rack and Pinoin	Remote Controller	:	2-Channels 315 MH2 UH

celmer

Maximum gate weight is 600 kg
Opening speed 9 meter / min ( 15.5m/min available)
Grease type Gear Box (non oil bath)
Support photo beam input for extra safety feature
Limit switch using micro switch
Dual speed motor : reduce to ultra low speed while reaching the ends
Auto reverse anti-crushing safety feature
Soft-start to eliminate jerking of gate

osk 533

Features

* Silent Operation.
* Soft start / soft stop.
* Simple push button operation.
* Waterproof motor casing.
* Thermal bimetallic device.
* Synthetic oil for long life.
* Computerized control.
* S1 Continuous duty service.
* Ventilation through Bidirectional Fan.
* Cremallera racks (No rust No corrosion).
* Power supply three phase 415 V ±10 %, 50 – 60 Hz.
* Power connectivity using 07 / 44 armor or guarded cable.
* Power consumption 1.5 Kw (2.0HP).
* Capacity 3 Tones.
* Current 3.8Amps.
* Customized made to order.

Components

* Sliding motor with metal top container.
* System activation from guardhouse.
* IP55 standards.
* CPU with programmable microprocessor.
* Emergency stop.
* Open / close push button.
* Cremallera teeth hinges mounted on the gate.
* System base foundation brackets.
* Complete hardware kit.
* Wiring connectivity using multi core coded sigma signal cable (No losses)